29(53)
Picture 3-3
：
Select the Installation Site
3.4 Bearing Base
1) The foundation of the concrete base, according to the operation weight of the
machines, will put on steel bars, diameter above 9.5 mm(#3), and are
clustered together on the upper and lower layer of the base, inter spaced
about 10 cm.
2) When making concrete floor to be foundation, it is necessary to rough the
surface. After cleaning, water the floor and then start installation.
3) The concrete base has to be rigid; the mixing proportion of concrete is 1: 2: 4.
Put required anchor bolts into base, according to the request. Polishing and
flat the surface of the base when finished.
4) Put the machine on the base when it is fully dried out and rigid.
5) It has to be a well drainage works around the base to prevent water
remaining.
Picture 3-4
：
Bearing Base
