Shini SHD-E, Manual, Page: 7 / 29

7(29)
1.1 Coding Principle
1.1 Feature

Adopt hot air diffuser to keep plastics dry and temperature stable, thus
improve drying efficiency.

All material contact surfaces are made of stainless steel to eliminate
material contamination.

All models are equipped with externl power switch.

For SHD-25~150, heater pipes are connected by lead sheets and other
models are equipped with temperature protector to prevent heater pipe
from damaging by blower fault.

Overheat tripping can automatically cut off power when drying temperature
exceeds set deviation value.

Adopt heat-insulated blower to prolong blower lifespan.

All models standard equipped with 7-day timer and intermittent operation
function.

All models adopt microcomputer control and RS485 communication port.

Max. drying temperature is 160
℃
.

The series of blowers are equipped with overheat protector.