Shini Budget SG-24EB Series, Manual

Page: 57 / 60

57(60)
6.3 Preservation
At the time of preservation, ensure that no material is left in the machine.
Note!
All maintenance activities shall be done by professional staff to avoid
any injury and damage to the machine.
6.3.1 Daily Check
1) Check no damage to the material fender in the feed box and replace it in
case of any damage.
2) Check if the emergency stop switch functions normally. Start the machine
and then push the emergency stop switch. When restoring, turn the button
in the arrow direction (i.e. anticlockwise).
3) Check the main power switch to see if the functions of start, stop and
reverse are normal.
6.3.2 Weekly Check
1) Check the power line of machine has worn or damaged, if so, replaces It
immediately.
2) Check the safety switch.
3) Check the electrical connectors have loosened or not.
6.3.3 Monthly Check
1) After the reducer runs for its first 400 hours, the grease shall be replaced.
The period of grease replacement will be 4000 hours afterwards. Sufficient
amount of grease shall be maintained in the reducer box and periodic
check is needed. Timely supplement or replace the grease when it is
found the amount of grease decreases or the quality of grease
deteriorates. Please keep the appearance of mixing motor and reducer
clean and timely remove dust and dirt to better dissipate heat.
2) Check the cutting tool is not loosened or worn.
3) If the granulator is idle for long time, please apply the anti-rust oil on the
blade rest, fixed blade, blade rest, cutting chamber and screws to prevent
the rust.