Shini Budget SG-24EB Series, Manual

Page: 11 / 60

11(60)
of the material.
3) Noise level varies according to different granules.
4) To avoid plastic from sticking to the blades, all materials should be
crushed at normal temperature.
5) Power supply: 3
Φ , 230 / 400 / 460 / 575VAC, 50 / 60Hz.
1.4
Safety Regulations
Follow the instructions in this manual to avoid personal injury and damage to
machine components.
The following safety measures shall be followed when operating the granulator.
1.4.1 Safety Signs and Labels
Electrical installation must only be done by a competent electrician!
Before the granulator is opened for servicing and maintenance, always
disconnect the power with both the main switch and the control switch on
the granulator.
Never put any part of your body through the granulator openings, unless
both the main switch and the control switch on the granulator are in
"OFF" position.
High voltage! Danger!
This sign is attached on the control box and the wiring box.
Be careful with the rotating knives, they are very sharp and can cause
personal injury!
If the rotor must be turned manually-do this with great care!
The granulator should not be able to start before the hopper and screen
bracket are properly closed.
Attention please!
Ear protection is used during granulating of plastic materials.