PPM-50 PON Power Meter User’s Manual
Shineway Technologies, Inc.
- 8 -
press
to toggle between the functional setting interfaces. See Figure 3.3
Threshold Select
Unit Select
dBm
Thres_name1
Curr.Thres.Setting
Threshold ON-OFF
Zero
ON
System Setting
2011-09-15 17:41
5
Fig 3.3
3.2.1 Unit Switch
Under functional setting interface, press
and
to toggle to [Unit Select],
see Figure 3.3
Press
to select unit, press
to exit functional setting interface.
3.2.2 Threshold Switch
Under functional setting interface, press
and
to toggle to [Threshold
On-Off], see Figure 3.4
Threshold Select
Thres_name1
Curr.Thres.Setting
阈值开关
Zero
打开
System Setting
2011-09-15 17:41
5
Unit Select
dBm
Threshold On-Off
OFF
Fig 3.4
Press
to turn on/off threshold switch, press
to exit functional setting
interface.
Note: If [Threshold On-Off] is
“
On
”
, under [Meas&Save] interface, the threshold
results will based on and compared with current threshold. The compared
threshold results will shows
“
FALL
”
,
“
WRNG
”
,
“
PASS
”
, meanwhile the
Test Record Indicator will be on.
