OFI-60 User’s Manual
Shineway Technologies, Inc.
- 5 -
2.2.2 Keypad Instruction to Instrument Panel and Functions
As shown in the above figure, the keys and touch screen are introduced as follows:
represents the power on/off button, which is used to turn on or off the power supply
of OCID;
represents the visible red light switch button; shortly press once for the open state,
twice for the modulation signal, and press again for the close state;
represents the run/stop button, making the OCID switch between running and stop
states. After pressing this button, the instrument is in the testing mode, and the status bar of
instrument display shows "running" with real-time waveform, while the Audio Output
outputs the audio signal to the headset. Press this button again, it will show "stop", with both
waveform and voice disappearing;
represents the level increase button, the operation of which under the main testing
interface may increase the level value, thus increasing the sensitivity of the machine;
represents the level decrease button, the operation of which under the main testing
interface may decrease the level value, thus decreasing the sensitivity of the machine;