background image

OVA-50 User’s Manual 

 

Shineway Technologies, Inc.                    

- 12 -

 

 

6 Warranty Information 

6.1 Warranty Period 

All 

ShinewayTech

  products  are  warranted  against  defective  material  and  workmanship 

for a period of one (1) year from the date of shipment to the original customer. Any product 

found to be defective within the warranty period would be repaired or replaced by Shineway 

Technologies Inc free of charge.   

In no case will Shineway Technologies, Inc liabilities exceed the original purchase price of 
the product. 

6.2 Exclusion 

The warranty on your equipment shall not apply to defects resulting from the following: 

 

Unauthorized repair or modification 

 

Misuse, negligence, or accident 

Shineway Technologies, Inc. reserves the right to make changes to any of its products at any 

time without having to replace or change previously purchased units.

 

 

6.3 Warranty Registration 

A  warranty  registration  card  is  included  with  the  original  shipment  of  equipment.  Please 

take a few minutes to fill out the card and mail or fax it to the local Customer Service Center 

of Shineway Technologies, Inc. for your product warranty activation. 

 

6.4 Returning Instrument 

To return instrument for yearly calibration or other purposes, please contact the local 

Customer Service Center of Shineway Technologies, Inc to obtain additional information 

and a RMA (Return Materials Authorization) number. And describe brief reasons for the 

return of the equipment to help us offer you efficient services.   

 

 

To  return  the  instrument  in  the  case  of  repair,  calibration  or  other 

maintenance, please note the following:   

 

Summary of Contents for OVA-50



















Reviews: