Shine KITCHEN SJV-107, Operation Manual, Page: 13 / 44

13
• Check that the power cord is plugged into a working socket.
• Check that all parts have been assembled correctly.
• If your machine may have shut off due to overheating allow
your machine to rest until it has cooled down and then try
restarting operations.
• Contact your customer service center.
• Check whether there is a lot of pulp in the Auger Housing.
If so, turn the juicer on to remove the excess pulp.
• Check whether there is any hard objects stuck in the Feeding
Chute. The REV button may help dislodge it.
• Contact your customer service center.
• Use the REV button to dislodge any stuck pulp or produce.
• Feed the juicer at a slower pace.
• Cut your produce into smaller pieces.
• Contact your customer service center.
• Check to see if the silicone sealing ring is in place at the
bottom center of the Auger Housing.
• Check to see if there is any damage to the silicone sealing ring.
• Feed the juicer at a slower pace.
• Contact your customer service center.
• This is normal during operation and is designed to reduce strain
on the moving parts.
The motor does
not turn on.
Trouble
removing the
Feeding Chute.
The juicer stops
during operation.
Leak from the
bottom of the
Auger Housing.
The Auger
Housing moves
while juicing.
#juicetribe inspiration:
“My go to juice every morning is celery, ginger,
lemon or grapefruit, lemon, cayenne with a
tablespoon of olive oil.”
-Paige Hernandez
#juicetribe member
EN
9. TROUBLESHOOTING