11
Sealing Ring*
1. Disassembly: Locate the circular, silicone sealing
ring from the bottom of the Auger Housing and
push its outer edge toward the center until it
comes off completely.
2. Assembly: After it is thoroughly dried, put the
sealing ring properly back in its place. Compress
the sealing ring from two sides and slide it into
the center portion of the Auger Housing with the
larger side facing up. Adjust the ring until it is
fitted above and below the plastic ridge. Once
properly in place, the sealing ring should be
secure.
1. Clean the following parts with soap and running water. These parts may be soaked
for easier cleaning. Use both ends of the Brush to thoroughly clean and remove any
left over pulp.
2. Use a damp cloth or sponge to clean the Main Body. Do not submerge or use
running water to clean the Main Body.
7. CLEANING AND MAINTENANCE
EN
#juicetribe tip:
If you like things spicy, try adding a spicy pepper
to your next juicing combination to spice things up!
Auger
Housing
Sealing Ring*
See below for
more instructions.
Sealing Ring illustrated
from bottom of the
Auger Housing
Auger
Feeding Chute
Pusher
Pressure
Plug
Summary of Contents for SJV-107
Page 2: ...2...
Page 3: ...3 LANGUAGES English 4 Fran ais 14 Deutsch 24 Espa ol 34...
