![background image](http://html1.mh-extra.com/html/shindaiwa/t302x/t302x_operators-manual_1257938032.webp)
OPERATION
T302X
32
X7502350302
© 10/19 ECHO Incorporated
Note: If engine does not start after 5 pulls, use Cold Start
Procedure.
Stopping Engine
1.
Throttle
Release throttle trigger and
allow engine to return to idle
before shutting off engine.
2.
Stop Switch
Move stop switch (A) to STOP
position.
The cutting attachment will continue to rotate even after the
throttle is released, maintain control of the unit until it has come
to a complete stop
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
Operation With Blades
Metal blades are very sharp and can cause severe injuries, even
if engine is off and blades are not moving. Avoid contact with
blades. Wear gloves to protect hands.
Blade use demands specific brush cutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
A