Shindaiwa SBL133IDG, Owner'S And Operator'S Manual

Page: 13 / 28

10
6. Assembly at Purchase
Although the cover is fitted to the balloon lamp fitting when shipped from the factory, the
balloon fabric is not installed. Perform the following procedures to install.
6-1. Removing the Lamp Fitting Cover
Apply the wheel brakes. (Refer to "5-2. Applying the Wheel Brakes".)
Use the outriggers to secure the generator. (Refer to "5-3. Using the Outriggers".)
Place the lamp fitting so that it is horizontal and secure it. (Refer to "5-4. Using the Lamp
Fitting".)
Remove the lamp fitting cover.
<Removing the Lamp Fitting Cover>
1 Untie the knot of the cord, slide the cord
stopper, and make the opening larger.
Insert the lamp fitting lever protruding out from
the cover cut into the cover.
Open the zipper and remove the cover.
<Storing the Lamp Fitting Cover>
1 Close the zipper.
Fold both ends of the cover so that the Velcro
tabs comes together at the edges.
Fold right in the middle so that the Velcro tabs
become affixed.
Attach the grommet to the storage hook.
1
2
3
4
Lamp Fitting Lever
Cut
Cord Stopper
Zipper
Velcro
Grommet
Storage Hook
Grommet
Cover
Velcro