manualshive.com logo in svg

Shindaiwa M2510, Owner'S/Operator'S Manual

Share
Download
Shindaiwa M2510 Owner'S/Operator'S Manual Download Page 4

4

Fuel tank capacity .....................................................................600 cm

3

Fuel/oil ratio .................................................. 50:1 with ISO-L-EGD or
 

JASO FC class 2-cycle mixing oil*

Carburetor  ......................................... . Walbro WYL diaphragm-type
Ignition  ..................................... Fully electronic, program controlled
Spark plug ....................................................................... NGK CMR5H
Air filter ..............................................................................Dry element
Starting method .......................................................................... Recoil
Stopping method  ...............................................................Slide switch
Cooling system  .....................................................................Forced air
Transmission type  ..........Automatic, centrifugal clutch with bevel gear

Product Description

M2510 

Multipurpose 

Tool Carrier

Outer Tube

Grip

Using the accompanying illustrations as 
a guide, familiarize yourself with this unit 
and its various components. See Figure 2. 
Understanding your unit helps ensure top 
performance, long service life and safer 
operation.

Handle

Throttle 

Trigger

Figure 2

Throttle

Interlock

Ignition

Switch

Fuel

Tank

6SHFLÀFDWLRQV

WARNING!

Do not make unauthorized 

PRGL¿FDWLRQVRUDOWHUDWLRQVWRDQ\RI

these units or their components.

Coupler Screw Knob

Latch

Latch protector

Figure 2a

Coupler

Spark  Plug

Engine Name  .................................................................... M2510/EC2
Engine model........................................................................SF2510EC2
Engine type ................................ .4-cycle, vertical cylinder, air cooled
Dry weight (less attachments) ..................................................  4.3 kg
Dimensions (L xHxW)  ......................1038 mm x 213 mm x 250 mm
Displacement  ...........................................................................24.5 cm

3

Bore x stroke .......................................................................34 x 27 mm
Engine Speed at Maximum Power Output  ....................... 8,000 min

-1

Maximum power output ............................................................ 0.8 kW
Engine speed at idling  ........................................................ 3,000 min

-1

Maximum engine speed  .................................................. .10,500 min

-1

Specifications are subject to change without notice.

*Sound Pressure Level: In accordance with EN ISO 11806 
and ISO 22868 (average data between Idling and a WOT)

**Sound Power Level: In accordance with EN ISO 11806 and 
ISO 22868 (average data between at Idling and at WOT)
***Vibration Level: In accordance with EN ISO 11806 and 
ISO 22867.

Note 1: 8-tooth blade equipped
Note 2: Trimmer head equipped

Sound Pressure Level *(average data between at Idling and at WOT) Note 1 .................................................................................. 92 dB (A)
Sound Power Level ** (average data between at Idling and at WOT) Note 1 ................................................................................. 101 dB (A)
Vibration Level** (Idling [Front/Rear]) Note 1 ..............................................................................................................................  4.0/1.1 m/s

2

 

(WOT [Front/Rear]) .................................................................................................................................  5.1/8.0 m/s2

Sound Pressure Level *(average data between at Idling and at WOT) Note 2 .................................................................................. 95 dB (A)
Sound Power Level **  (average data between at Idling and at WOT) Note 2................................................................................. 105 dB (A)
Vibration Level***        (Idling [Front/Rear]) Note 2 ...................................................................................................................... 1.0/1.2 m/s

2

 

(WOT [Front/Rear]) Note 2 ......................................................................................................................3.7/6.0 m/s

2

With Shindaiwa SBA-TX24 Splitboom Attachment

Specifications are subject to change without notice.

*Sound Pressure Level: In accordance with ISO 11680-1

**Sound Power Level: In accordance with ISO 11680-1
***Vibration Level: In accordance with ISO11680-1

Sound Pressure Level *(Idling) ............................................................................................................................................................... 70 dB (A)
  

(WOT) ................................................................................................................................................................95 dB (A)

Sound Power Level **  (Idling) ............................................................................................................................................................... 84 dB (A)
 

(WOT) ..............................................................................................................................................................106 dB (A)

Vibration Level***        (Idling [Front/Rear])  ................................................................................................................................. 1.0/1.2 m/s

2

 

(WOT [Front/Rear]) .................................................................................................................................  4.1/7.5 m/s2

With Shindaiwa SBA-P24 Splitboom Attachment 

(254 mm Guide Bar Equipped)

Specifications are subject to change without notice.

*Sound Pressure Level: In accordance with ISO 11680-1

**Sound Power Level: In accordance with ISO 11680-1
***Vibration Level: In accordance with ISO11680-1

Sound Pressure Level * (Idling) .............................................................................................................................................................. 71 dB (A)
 

(WOT) ................................................................................................................................................................90 dB (A)

Sound Power Level **  (Idling) ............................................................................................................................................................... 84 dB (A)
 

(WOT) ..............................................................................................................................................................104 dB (A)

Vibration Level***        (Idling [Front/Rear]) .................................................................................................................................. 0.9/1.5 m/s

2

 

(WOT [Front/Rear]) .................................................................................................................................. 5.8/8.3 m/s2

With Shindaiwa SBA-AH2422 Splitboom Attachment

Shoulder 

Strap

Summary of Contents for M2510



















Reviews:

No comments

Brands by name

Popular brands

Load more brands