background image

17

  Shindaiwa Kogyo Co., Ltd. warrants to the initial purchaser and 

each subsequent owner, that this utility equipment engine (herein en-

gine) is designed, built and equipped to conform at the time of initial 

sale, to all applicable regulations of the U.S. Environmental Protec-

tion Agency (EPA), and that the engine is free of defects in materials 

and workmanship that would cause this engine to fail to conform with 

EPA regulations during its warranty period. This emission warranty is 

applicable in all States, except the State of California.

  For parts listed under PARTS COVERED, the dealer authorized by 

Shindaiwa Kogyo Co., Ltd. will, at no cost to you, make the necessary 

diagnosis, repair, or replacement of any defective emission-related 

component to ensure that the engine complies with applicable U.S. 

EPA regulations.

MANUFACTURERS WARRANTY COVERAGE

  When sold within the U.S., this engine’s emission control system is warrant-

ed for a period of two (2) years from the date this product is first delivered to 

the original retail purchaser.

OWNER’S WARRANTY RESPONSIBILITIES

  As the engine owner, you are responsible for the performance of the 

required maintenance listed in your owner’s manual. Shindaiwa Kogyo Co., 

Ltd. recommends that you retain all receipts covering maintenance on your 

engine, but Shindaiwa Kogyo Co., Ltd. cannot deny a warranty claim solely 

for the lack of receipts or for your failure to ensure the performance of all 

scheduled maintenance.

  As the engine owner, you should however be aware that Shindaiwa Kogyo 

Co., Ltd. may deny your warranty coverage if your engine or a part has failed 

due to abuse, neglect, improper maintenance or unapproved modifications.

  You are responsible for presenting your engine to the nearest dealer autho-

rized by Shindaiwa Kogyo Co., Ltd. when a problem exists.

  If your Shindaiwa Dealer is unable to answer questions regarding your 

warranty rights and responsibilities, you should then contact your Shindaiwa 

Distributor.

  For the name and telephone number of the Shindaiwa Distributor in your 

area, please call Shindaiwa Inc. at (503) 692-3070 between the hours of 8:00 

AM and 5:00 PM Pacific Standard Time.

PARTS COVERED

  

Listed below are the parts covered by the Federal Emission Design and De-

fect Warranty. Some parts listed below may require scheduled maintenance 

and are warranted up to the first scheduled replacement of that part. The 

warranted parts include:
1.  Carburetor Internal Components
   

• Valve Assembly-throttle, Jet, Metering Diaphragm

2.  Ignition System Components   
   

• Ignition Coil

   

• Flywheel Rotor

  The emission control system for your particular Shindaiwa engine may also 

include certain related hoses and connectors.

LIMITATIONS

  The Federal Emission Design and Defect Warranty shall not cover any of 

the following:

(a) conditions resulting from tampering, misuse, improper adjustment 

(unless they were made by the dealer or service center authorized 

by Shindaiwa Kogyo Co., Ltd. during a warranty repair), altera-

tion, accident, failure to use the recommended fuel and oil, or not 

performing required maintenance services,

(b) the replacement parts used for required maintenance services,
(c) consequential parts used for required maintenance services,
(d) diagnosis and inspection fees that do not result in eligible warranty 

service being performed, and 

(e) any non-authorized replacement part, or malfunction of authorized 

parts due to use of non-authorized parts.

MAINTENANCE AND REPAIR REQUIREMENTS

  You are responsible for the proper use and maintenance of the engine. You 

should keep all receipts and maintenance records covering the performance 

of regular maintenance in the event questions arise. These receipts and 

maintenance records should be transferred to each subsequent owner of the 

engine. Shindaiwa Kogyo Co., Ltd. reserves the right to deny warranty cover-

age if the owner has not properly maintained the engine. Shindaiwa Kogyo 

Co., Ltd. will not deny warranty repairs, however, solely because of the lack of 

repair, maintenance or failure to keep maintenance records.

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL 

DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTAB-

LISHMENT  OR  INDIVIDUAL;  HOWEVER,  WARRANTY  REPAIRS  MUST 

BE  PERFORMED  BY  A  DEALER  OR  SERVICE  CENTER  AUTHORIZED 

BY SHINDAIWA KOGYO CO., LTD. THE USE OF PARTS THAT ARE NOT 

EQUIVALENT  IN  PERFORMANCE  AND  DURABILITY  TO  AUTHORIZED 

PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL 

SYSTEM  AND  MAY  HAVE  A  BEARING  ON  THE  OUTCOME  OF  A  WAR-

RANTY CLAIM.

  If other than the parts authorized by Shindaiwa Kogyo Co., Ltd. are used for 

maintenance replacements or for the repair of components affecting emission 

control, you should assure yourself that such parts are warranted by their 

manufacturer to be equivalent to the parts authorized by Shindaiwa Kogyo 

Co., Ltd. in their performance and durability.

OBTAINING WARRANTY SERVICE

  All repairs qualifying under this limited warranty must be performed by a 

dealer authorized by Shindaiwa Kogyo Co., Ltd.

  If any emission-related part is found defective during the warranty period, 

it is your responsibility to present the product to an authorized Shindaiwa 

dealer. Bring your sales receipts showing the date of purchase for this engine. 

The dealer authorized by Shindaiwa Kogyo Co., Ltd. will perform the neces-

sary repairs or adjustments within a reasonable amount of time and furnish 

you with a copy of the repair order. All parts and accessories replaced under 

this warranty become the property of Shindaiwa Kogyo Co., Ltd.

  To locate an authorized Shindaiwa dealer near you, contact your Shindaiwa 

Distributor. For the name and telephone number of the Shindaiwa Distributor 

in your area, please call Shindaiwa Inc. at (503) 692-3070 between the hours of 

8:00 AM and 5:00 PM Pacific Standard Time.

THIS WARRANTY IS ADMINISTERED BY 

Shindaiwa Inc.

11975 S.W. Herman Rd.

Tualatin OR. 97062

(503) 692-3070 

The following statement only applies to United States and its territories

Shindaiwa Kogyo Co., Ltd. Federal Emission  

Design And Defect Limited Warranty Utility And Lawn And Garden Engines

Summary of Contents for LE230





















Reviews: