- 21 -
7-5. Welding
1. Start the engine.
2. Adjust the current using current adjusting dial.
Be sure to check the preset welding mode
lamp turns on. Rotate the current dial to the
desired preset welding current as indicated on
the display.
3. After striking welding arcs, the display
indicates actual welding current and the actual
welding lamp illuminates.
Warning: Electromagnetic Interference
Persons using a heart pacemaker are not allowed near the Generator work area
while the Generator is in operation without the permission of a doctor. The welder
generates a magnetic field while energized that can negatively affect pacemaker
operation.
This product may cause interference if used in residential areas.
Such use must be avoided unless the user takes special measures to reduce
electromagnetic emissions to prevent interference to the reception of radio and
television broadcasts.
Warning: Suffocation from welding fumes
Be sure to wear a fume proof mask during operation, as welding fumes contain
poisonous gases and dust. Pay attention to the airflow direction and ensure
sufficient ventilation in order to prevent inhalation of the fumes.
Warning: Fire
Keep any flammable items and combustible materials away from the welding area
as welding creates hot sparks.
Always set up extinguishers near the welding area.
Warning: Explosion
Do not use this equipment for the purpose of thawing pipes.
Caution: Injuries to eyes and skin
Be sure to wear spark protection glasses, long-sleeve shirts, gloves, etc. in order to
protect eyes and skin from harmful sparks during welding. (Refer to the table below.)
Light Shielding Standard Glass
Caution: Burns
Be sure to wear leather gloves, apron, shoe covers, eye protection glasses/mask,
safety shoes, safety cap and long sleeve shirts, to protect from sparks.
Light Shielding Degree No.
Welding Current (A)
30-75
7
8
9
10
11
12
13
76-200
201-400
Current Adjusting Dial
