23
Maintenance and care
Cleaning housing cover
Remove dust of various sorts, including fallen leaves blocking
the housing cover.
Check spark plug
Tools required: Spark plug wrench, Feeler gauge
Parts required: Spark plug
1.
Remove and clean the spark plug.
2.
Check plug gap. Correct gap is 0.6 mm.
3.
Inspect electrode for wear.
4.
Inspect insulator for oil or other deposits.
5.
Replace plug if needed and tighten to 16.7 N·m - 18.6 N·m
(170 kgf·cm to 190 kgf·cm).
1. Housing cover
IMPORTANT
Do not remove the housing cover. If necessary, Please consult
your dealer.
a: 0.6 mm
IMPORTANT
Never allow dirt or debris to enter the cylinder bore. Before
removing the spark plug, thoroughly clean the spark plug
and cylinder head area.
Use only NGK CMR5H or equivalent type plug of the correct
heat range otherwise severe engine damage may occur.
