Shindaiwa DG20MK-P, Owner'S And Operator'S Manual

Page: 37 / 48

34
Check that there no rust has developed inside of the spill containment. If rust has
developed, remove the rust and clean again.
After the procedures have been completed, apply sealant coating to the plug (R1”) or
wrap it in seal tape.
< Note >
If the fluid drained when cleaning the spill containment contains oil or grease, dispose of it
according to the related laws and regulations.
If the spill containment has a leak, contact the authorized distributor where the generator was
purchased.
Inlet Port Return Port
Wire Connector
Lifting Hook
Fuel Tank
Spill Containment
Bolt
Washer
Bolt
Washer
Wire Connector
Fuel Line (Inlet Side)
Fuel Line (Return Side)
4
5