6
Install Hanger
1. Position the hanger (A) on the outer tube (B) between the handle
and throttle assembly and secure the hanger with the nut (C) and
bolt (D).
A
B
C,D
Install Handle and Barrier Bar
T242 with 1-screw Handle
1. Install Handle and Barrier Bar.
2. Adjust handle position for comfortable operation, and tighten screw securely.
Barrier Bar and Hanger Assembly
1. Install the barrier bar (H) with the socket-head cap
screws (A) and nuts (I). Tighten the screws finger-tight
ONLY at this time.
2. Locate the handle (B) in the best position for operator
comfort (usually about 10 inches ahead of the throttle
housing (E)).
3. Secure the handle by alternately tightening the four
socket-head screws in a diagonal or “criss-cross” fash-
ion.
Handle Positioning Label
T242 with 4-screw Handle
E
A
B
I
H
