5
Prior To Assembly
Using Figure 4 as a guide, familiarize your-
self with the Shindaiwa AH2510 articulated
hedge trimmer and its various compo-
nents. Understanding your machine helps
ensure top performance, longer service
life, and safer operation.
Before assembling, make sure you have all
the components required for a complete
unit:
n
Engine assembly
n
Outer tube/cutter assembly
n
Kit with this manual and tool kit for
routine maintenance.
n
Cutter blade scabbard
Carefully inspect all components for
damage.
Product Description
IMPORTANT!
The terms “left”, “left-hand”, and “LH”;
“right”, “right-hand”, and “RH”; “front” and
“rear” refer to directions as viewed by the
operator during normal operation.
Recoil
Starter
Handle
Grip
Figure 4
Outer
Tube
Hedge Trimmer Cutter
Assembly
Cutter Assembly
Adjustment Lever
Cutter Blade
Scabbard
Hand
Guard
WARNING!
Do not make unauthorized modifica-
tions or alterations to your articulated
hedge trimmer or its components.
Specifications are subject to change without notice.
Standard Equipment : Tool kit containing a spark plug wrench,
4 mm hex wrench, and 8 x 10 mm spanner
Optional Equipment : Harness and bracket
Model Name ............................................................................AH2510
Engine Model ........................................................................ SF2510E
Engine Type ............................. 4-cycle, vertical cylinder, air cooled
Dry Weight .................................................................14.0 lbs./6.3 kg
Bore x Stroke .............................................. 34 x 27 mm/1.34 X 1.06”
Displacement .......................................................... 24.5 cc/1.5 cu. in.
Engine Speed at Maximum Power Output ..........7,500 rpm (min
-1
)
Maximum Power Output .............................................1.1 hp/0.8 kW
Engine Speed at Idling ..........................................3,000 rpm (min
-1
)
Maximum Engine Speed .....................................10,500 rpm (min
-1
)
Fuel/Oil Ratio .......................................... 50:1 with Premium 2-cycle
air cooled mixing oil
Fuel Tank Capacity .......................................................590 ml/20 oz.
Carburetor .......................................... Walbro WYL diaphragm type
Ignition System ...................... Fully electronic, program controlled
Spark Plug ..................................................................... NGK CMR5H
Air Filter ....... Non-reversible, heavy-duty, two -stage filter element
Starting Method ............................................................ Recoil starter
Stopping Method ..............................................................Slide switch
Cooling System ...................................................................Forced air
Transmission Type .............................Automatic, centrifugal clutch
with bevel gear
Blade Length ............................................................. 22.3 in/567 mm
Cutter Drive ..........................................................................Spur gear
Gear Lubricant................................................. Lithium based grease
Specifications
AH231_07
Gearcase
Hedge Trimmer
Cutter Assembly
Cutter Bar and
Cutter Blades
Latch
Release
Latch Lock
Fuel Tank
Air Filter
Assembly
Stop Switch
Powerhead Assembly
Fuel Tank Guard
Spark
Plug
Throttle
Trigger
Summary of Contents for 62640-94313
Page 18: ...18 NOTES...
Page 19: ...19 NOTES...
