Shindaiwa 269T Instruction Manual Download Page 5

 

 

 

 

 

 

 

 

PERSONAL EQUIPMENT 

• 

Always wear head, eye and hearing protection when 

operating this machine to protect yourself from 

wood chips, dust, snapping branches, noize and etc. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• 

Never wear loose clothing, unbuttoned jackets, 

flared sleeves and cuffs, scarfs, tie-strings, neckties, 

cords, chains, jewelry, etc. which could snag the saw 

chain or underbrush. 

• 

Clothing should be of sturdy, protective material. It 

should be snug-fitting to resist snagging, but roomy 

enough for freedom of movement. 

• 

Trouser legs should not be flared or cuffed, and 

should be either tucked into the boot tops or 

trimmed short. 

• 

Safety vests, leg chaps and logger’

 pants of 

ballistic material are available. 

It is the operator’s responsibility to wear such 

additional protection if conditions warrant it. 

• 

Never operate a chain saw when you are alone. 

Arrange to have someone remain within calling 

distance in case you need help. 

 

 

 

 

 

 

• 

All persons who make part of their living using 

chain saws should be tested periodically for hearing 

deterioraration. 

• 

Always wear a cap or hat when working with a 

chain saw. A safety hard hat is highly recommended 

when felling or working under trees, or when objects 

can fall on you. 

• 

Wear heavy duty, non-slip gloves. 

• 

Safety tip shoes or boots with non-slip sole should be 

worn. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FUEL 

 

 

 

 

 

 

 

 

• 

Use an appropriate type fuel container.   

• 

Do not smoke or bring flame or sparks near fuel 

supplies.  

• 

The fuel tank may be under pressure. Always loosen 

the fuel cap and wait for pressure to be equalized 

before removing the cap. 

 

 

WARNING     DANGER

PETROL AND FUEL ARE EXTREMELY FLAMMABLE. 

IF SPILLED OR IGNITED BY IGNITION SOURCE, IT 

CAN CAUSE FIRE AND SERIOUS INJURY OR 

PROPERTY DAMAGE. EXTREME CAUTION IS 

REQUIRED, WHEN HANDLING PETROL OR FUEL. 

CAUTION

Stuffing ears with cotton is not recommended. 

6

2

3

4

5,6

Summary of Contents for 269T





























Reviews: