- - 14 - -
Maintenance
Cleaning
CAUTION: Before cleaning, please turn off the air conditioner and pull out the plug.
Cleaning the Surface
Clean surface of the air conditioner with duster or semi-wet soft cloth.
Do not use chemical reagents and solvents, such as benzene, alcohol and
gasoline, etc. as this may damage the surface as well as the internals of the air
conditioner.
Cleaning of Filters
If the filters are blocked by dust, air circulation will be impeded which will reduce
efficiency of the air conditioner. We recommend if the air conditioner has been used
for a long time or in a dusty area, to clean the filters out once every two weeks.
Pull out the filters in the directions
shown in Fig.15.
o
Take out Filter 2 first and
then Filter 1
Put the filters into warm water (about
40
℃
) with neutral detergent and
wash carefully.
Once finished, dry the filters away
from direct sunlight.
Install filters to the original position in
the direction as shown in Fig.15.
o
Re-Install Filter 1 first and
then Filter 2
Postseason storage
If the air conditioner is not being used for a long time or being put into storage, please
make sure to keep these maintenance measures in mind.
Drain all water in water bucket from drain outlet. (You may need to recline the A/C
back to completely drain the water from the bucket.)
Set the air conditioner to internal dry function by adjusting operating mode to FAN
mode, and then press SPEED for 5 seconds. Deep this operating mode on for
2~3 hours. This will help dry inside of the body and prevent mildew.
Turn off the air conditioner and pull out power plug.
Wind up, fasten and put away power line.
Remove exhaust pipe and store properly to prevent damage.
Set the air conditioner into plastic bag and put it in a dry place.
Take out the batteries in the remote control and store.
Filter 1
Filter 2
Fig.15
