background image

Before moving the appliance,the water tank should be emptied.

The handle on the appliance is designed to aid in its movement and should not be used to

support the full weight of the dehumidifier.  When carrying the unit, it should be kept upright

and sufficiently supported from its base.

The  appliance  must  be  placed  in  a  room  without  sources  of  ignition  (for  example:  open

flames, an operating gas appliance or an operating electric heater).

Do not use or store the appliance in an unventilated space with an area smaller than 43 sq.ft

(4m

2

 )per unit.

If the appliance is installed, used or stored in an unventilated room, the room must be such

as to prevent stagnation of possible leaks of refrigerant gas as there could be a danger of fire

or explosion once the refrigerant comes into contact with electric heaters, stoves or other

sources of ignition.

Do not use the product and contact the retailer for advice, if damage has occurred to the unit

which may have compromised the refrigerant system.

Any  repairs  or  maintenance  must  only  be  carried  out  on  the  unit  by  a  suitably  qualified

engineer.Before  opening  and  servicing  the  unit,the  authorized  engineer  must  be  in

possession of a copy of the manufacturer’s service manual and must follow the safety

information contained within it to ensure all hazards are minimized.

The refrigerant system should not be perforated or punctured.

Do not place the unit next to heat sources (e.g. electrical fires, fireplaces, etc.)

Avoid mishandling the dehumidifier. Dropping, throwing the unit can cause damage to its

internals and increases the risks of operating it.

Do not store or use gasoline, petrol, paint, solvents or other flammable vapours or liquids in

the vicinity of this dehumidifier or any other appliance.

This dehumidifier must not be used in spaces where there is a high concentration of gases,

solvent or other volatile organic compounds; in very dusty environments; in any domestic,

commercial or industrial environment where the air composition is flammable.

ELECTRICAL INFORMATION

Be sure the dehumidifier is properly grounded. To minimize shock

and fire hazards, proper grounding is important. This power cord is

equipped with a three-prong grounding plug for protection against

shock hazards.

Your dehumidifier must be used in a properly grounded wall

socket. If your wall socket is not adequately grounded or

protected by a time delay

fuse or circuit breaker, have a qualified electrician install the

proper socket.

Avoid fire hazard or electric shock. Do not use an extension cord

or an adapter plug. Do not remove any prong from the/power

cord.

4

Summary of Contents for SDZ1-70P/P

















Reviews: