24
•
Turn off the power.
•
Push the SD card inwards and then release it. The card
should pop out leaving the outside edge of the card protruding.
•
Carefully grip the card and pull it out of the slot.
Note:
SD cards have a locking switch that enables you to protect
your data if you want. This is located on the longer side of the card
away from the cut off corner. If the switch is towards the leading
edge of the card, you will be able to move and delete titles. If the
switch is away from the leading edge, your data will be protected.
You must ensure that the switch is in the correct position before
inserting the card otherwise you may experience difficulties in
performing the operations you wish to carry out. To move the switch,
simply use a fingernail to move the switch into the desired position.
To insert the USB memory, do the following:
•
Turn off the power.
•
Insert the USB memory into the USB slot.
To eject the USB memory, do the following:
•
Turn off the power.
•
Pull out the USB memory straight from the unit.
To insert a CD into PLEXTALK, do the following:
•
Ensure that PLEXTALK is turned on.
•
Turn the CD so that the label side is upwards.
•
Gently push the CD into the CD slot on the front of PLEXTALK.
•
Continue to push the CD into the slot until PLEXTALK takes
over and feeds the CD the rest of the way.
Note:
If you accidentally insert a CD upside down, PLEXTALK will
attempt to access it for a while and then will say " There is no content
on the disc." You should then eject the CD and ensure that it is
inserted the correct way up.
