12
Maintenance
Adjusting axle bearings
(2) Set the end of the attachment so that it engages the far end of the interior of the
inner bush.
(3) Turn the handle to expand the end of the bearing puller.
(4) Pull out the bearing puller and inner bush.
Attachment
Inner bush
5.
Take out the outer bush.
Push it out from the crank axle side with a pin or similar tool [#8].
Outer bush
6.
Remove old grease and apply an appropriate amount of new grease to
the inner bush and outer bush.
TECH TIPS
•
Apply grease to the extent that it does not flow out when the axle is set into the
pedal (approximately 0.6 g for the inner bush and 0.4 g for the outer bush).
