Disassembly of the Inter-7 hub
1.
Hold the two bevelled surfaces
of the hub axle on the brake
arm side in a vice and remove
the dust cap with a screwdriver.
2.
Turn the brake arm unit
upside down and hold
the two bevelled surfaces of
the hub axle on the sprocket
side in a vice.
2
SG-7C26
Tools
Note:
Unit parts should never be
disassembled. If they are,
problems may result.
When replacing parts,
replace the whole internal
assembly or unit part.
Note:
Before carrying out
disassembly, have ready
the hub spanners(TL-7S20)
and internal hub grease.
Note:
Do not damage the threads of
the hub axle.
Vice
Note:
Do not damage
the threads of
the hub axle.
Lock nut
Stop nut
Hub spanners
Part No. 3-130 9890
17mm x 22mm(2 pcs.)
TL-7S20
(Right)
Screwdriver
(Left)
Remove the left hand lock nut
from the hub axle, and then
remove the stop nut.
TL-7S20
