14
Adjustment
Connection and securing of the inner cable
Connection and securing of the inner cable
Outer casing length
1.
Loosen the B-screw to the position shown in the figure.
Make sure that the stopper plate touches the bracket body without leaving a gap.
B-screw
Bracket body
Stopper plate
2.
Determine the length of the outer casing.
Fit a sealed outer cap to the end of the outer casing. Align the end of the outer cap to
the bottom edge of the outer casing holder on the rear derailleur.
Make sure to leave enough slack in the outer casing.
Outer casing
Outer casing holder
Sealed outer cap (aluminum type)
NOTICE
•
Make sure to use OT-RS900 for the outer casing.
