Place non-turn washers onto the right and left of the hub axle.
Turn the cassette joint so that the protrusions of the non-turn washers fit into the grooves in the rear
dropouts and align the joint to be installed almost parallel to the chainstay.
Non-turn washer (for left-side use)
Rear dropout groove
Chainstay
Cassette joint
Non-turn washer
(for right-side use)
When installing parts such as a mudguard stay to the hub axle, install them in the order shown in
the figure.
Cap nut
Washer
Non-turn washer
Mudguard stay
Carrier stay
When installing the hub to the frame, the chain guard may come off. Make sure that the chain
guard is securely installed. If not properly installed, noise may be generated.
Chain guard
2.
Installation/removal
Installation of the hub to the frame
24
