5
TO ENSURE SAFETY
TO ENSURE SAFETY
DANGER
Be sure to also inform users of the following:
Handling the battery
•
Do not deform, modify, disassemble, or apply solder directly to the battery. Doing so may
cause leakage, overheating, bursting, or ignition.
•
Do not leave the battery near sources of heat such as heaters, and do not heat the
battery or throw it into a fire. Doing so may cause bursting or ignition.
•
Do not throw or subject the battery to strong shock. Doing otherwise may cause it to
overheat, burst, or ignite.
•
Do not place the battery into fresh water or sea water, and do not allow the battery
terminals to get wet. Doing otherwise may cause it to overheat, burst, or ignite.
•
When charging the specified battery, use the specified battery charger for charging and
observe the specified charging conditions. Doing otherwise may cause overheating,
bursting, or ignition.
WARNING
• Be sure to follow the instructions provided in the manuals when installing the product.
Only use SHIMANO genuine parts. If a component or replacement part is incorrectly
assembled or adjusted, it can lead to component failure and cause the rider to lose
control and crash.
•
Wear approved eye protection while performing maintenance tasks such as
replacing components.
•
For information on products not explained in this manual, refer to the manuals for each
product.
Be sure to also inform users of the following:
•
Do not to pay excessive attention to the cycle computer display while riding. Doing so
may result in an accident.
•
Check that the wheels are fastened securely before riding the bicycle. You may fall and
be seriously injured.
•
Be sufficiently familiar with how to start the power assisted bicycle before riding on busy
streets. You may start the bicycle unexpectedly, which may result in an accident.
