25
Installing electrical parts
Installing the speed sensor
Speed sensor mounting screw
(length 16 mm)
Toothed washer
Speed sensor mounting screw
(length 22 mm)
Spacer
Clearance between speed sensor
and magnet unit is 3 to 17 mm
Clearance between speed sensor
and magnet unit exceeds 17 mm
1.5 - 2 N·m
1.5 - 2 N·m
3.
Secure the magnet unit.
Mounting screw
Speed sensor
Magnet unit
Spoke
1.5 - 2 N·m
4.
Route the electric wire for the speed sensor to the frame along the
chainstay and wire it to the drive unit.
Type designed exclusively for use with a disc brake rotor
with magnet unit
For models: SM-DUE11 (SD50 type)
Use in combination with a disc brake rotor with magnet unit (rear wheel only).
1.
Install the disc brake rotor to the wheel.
• Refer to the “Disc Brake” chapter of General Operations for the installation method.
