61
13. Enhancing Productivity
Read Chapter 7 Before Use of
These Pages
13.4 Auto Zero
Not applicable to a verified balance as a legal measuring instrument in the EU
When the displayed value is within the Zero Range and stability is detected, zeroing occurs automati-
cally. The Zero symbol appears in the display when the Auto Zero function is active. Other keys func-
tion as expected with the Auto Zero function activated.
Select menu item
to activate it.
Notes
for details of Zero Range.
for details of stability detection.
• Pretaring Value (
) function cannot be used with Auto Zero function.
• Auto Zero setting can be cleared without menu operation, by pressing
the
[POWER]
key for about three seconds.
• Not more than one of these seven functions can be set at a time. Setting
the second one with the menu will automatically clear the previously set
function; Auto Print(
), Auto Zero(
), Peak Hold(
), Interval
Timer(
), Add-on mode(
), Animal Weighing mode(
), Formu-
lation mode(
).
• When minimum display has been switched to 10d (See
), the opti-
mized Zero Range for 1d display may cause failure in the operation.
Select optimal Zero Range value again when minimum display has been
changed (See
for details).
41
Summary of Contents for UW2200HV
