Conducting Examinations 1
For a Registered Study
Instruction Manual 3.7 Starting the Study
C
on
du
cti
ng
E
xa
m
in
at
io
ns
1
Starting an Examination
It takes a short while for the system to start-up.
If the preparation of fluoroscopy image functions is completed before starting an
examination, you can perform emergency fluoroscopy.
For a New Study (Emergency Patient)
You can set either from the main panel or the reference monitor.
This selection is only possible on the reference monitor.
When you obtain a study list,
please connect the LAN cable
to the back of the monitor cart.
• Temporary data information can be changed
afterward in the [Today] tab or the [All] tab in the
Study List window.
• The patient information of images acquired in an
emergency study can be changed later on by
updating the patient information in the [Image List].
1
The patient ID and patient name are set
automatically.
Press
(on the C-arm main panel) or
click
(on the reference monitor).
Basic screen (Emergency case)
C-arm main panel
Reference monitor
1
If the [Study List] window is not displayed,
click
.
2
Click the target study.
The study information is displayed in the
lower part of the window.
3
Click
.
The study is registered and begun.
Study List
Study information
LAN cable
Memo
Memo
M516-E044
