Shimadzu AGS-100NX, Instruction Manual

Page: 123 / 154

Chapter 6 Performing Compression and Bending Tests
6-5
6.4 Specifying Test Methods
1. Setting Test Force Polarity and Test
Starting Direction
On the [METHODS] menu, set [Pol./Start] to [Comp./Down].
2. Setting the Test Speed
Set test speed by selecting [Test Speed] on the [METHOD] menu.
For specimens with unknown rigidity, set the test speed adequately slow enough to prevent
sudden increases in test force.
Test Mode
Polarity/Start Direction
Test Mode
>Pol./Start
Comp./Down
METHOD
>Stroke
1.000 mm/min
Test Speed
Stroke
Test Speed
METHOD