Shihlin SA3 Series, User Manual

Page: 238 / 423

PG feedback parameter group 09
PARAMETER DESCRIPTION 236
5.10 PG feedback parameter group 09
Group
Parameter
Number
Name Setting Range Default Page
09-00 P.349 Encoder type
0：ABZ
0 238
1：ABZ (For synchronous motor)
2：Resolver 1x synchronous motor standard
encoder
3：ABZ/UVW synchronous motor standard
encoder
09-01 P.350 Encoder pulse 1 0～20000 1024 238
09-02 P.351 Encoder input type 1
0：Off
0 238
1：A/Phase B pulse wave，forward spin if Phase
A is over Phase B for 90 degrees
2：A/Phase B pulse wave，forward spin if Phase
B is over Phase A for 90 degrees.
3：Phase A :pulse wave，Phase B:directional
sign，L:reverse spin，H:forward spin
4：Phase A :pulse wave，Phase B: directional
sign，L:forward spin，H:reverse spin
09-03 P.352 PG error detection time 0～100.0s 1.0s 240
09-04 P.353
Over-speed detection
frequency
0～30.00Hz 4.00Hz 240
09-05 P.354 Over-speed detection time 0～100.0s 1.0s 240
09-06 P.355 Encoder pulse 2 0～20000 2500 240
09-07 P.356 Encoder input type 2
0：Off
0 240
1：A/Phase B pulse wave, forward spin if Phase
A is over Phase B for 90 degrees
2：A/Phase B pulse wave，forward spin if Phase
B is over Phase A for 90 degrees
3：Phase A :pulse wave，Phase B:directional
sign，L:reverse spin，H:forward spin
4：Phase A :pulse wave，Phase B: directional
sign，L:forward spin，H:reverse spin
09-08 P.357
Frequency division output
setting
1～255 1 241
09-09 P.358
Frequency division filter
coefficiency setting
0～255 0 241
09-10 P.359 Electronic gear ratio 0～65.535 1.00 242