Shiels AcTIVE Pro Call+ Instructions Manual Download

Page: 3 / 8

APP Installation & Connection

Scan the QR code or enter the APP Store and search for "Vband" in the App Store to

download and install the APP

Scan for iOS

Scan for Play Store App

Note: Android supports 5.0 and above, IOS supports 8.0 and above.

Bluetooth hardware 4.0 and above.

Device connection

Connect the watch using Bluetooth,

search for the device ‘U68’ in the list. If there

are too many devices to select from, find the MAC address of the watch to be

connected. On successfully connecting the watch to the mobile device, the status on

the V band app under device will show connected and the battery level.

(Note:

Before using the Bluetooth function, please confirm whether the

mobile’s

Bluetooth is turned on)

For audio connection, turn on the Bluetooth of the watch and search for

‘

U68-Audio

’

in the list of devices and connect.

Please allow all notification permissions such as reading, contact information and

allowing the app to run in background in the phone settings.

Summary of Contents for AcTIVE Pro Call+

Page 1: ......

Page 2: ...amaging the watch When measuring make sure the sensor is close to the skin and hold still Product measurement results are only used for reference instead of medical purposes Charging diagram Align the two contacts of the charger to the charging position on the back of the watch and connect the other end to the standard USB interface to charge ...

Page 4: ...reen on the dial page Swipe up to enter a message notification Swipe down to enter the shortcut menu Turn on Bluetooth for U68 Audio here Swipe left to enter the menu interface Slide the dial interface to the right to enter the audio interface Press and hold for 3 seconds to select different dial pads Features Change faces On main screen touch the screen to browse the faces ...

Page 8: ...is product is an electronic monitoring product not for medical reference the data is for reference only Please use factory reset with caution Restoring factory settings will result in the loss of all APP content settings and historical data of the watch ...