SHIELDeye SmartCam USER MANUAL
15
6.
You can either choose
Dynamic IP Address
to enable
DHCP protocol
or
Fixed IP Address
(a static IP
that you manually input. This IP address is provided by your ISP. Also input the
HTTP Port
(as shown),
RTSP Port: 554
as default.
NOTE: 1. When the device is connected by both WiFi and wired LAN, it will connect to the wired network
first.
2. If users enable Dynamic IP Address and use DHCP to obtain IP address automatically, the IP
address will change when the router restarts. This could cause wireless failure.
We recommend using Static IP and DDNS settings to avoid this loss.
7.
Select WiFi to connect the IP Camera by
Search.
E
nter the password of the WiFi into
Key
.
Click
Apply.
8.
Click
Check
to test the wireless set.
6.
Select your network configuration. Choose
Dynamic
IP Address
to use the DHCP protocol. Choose
Fixed
IP Address
(Static IP). Enter the IP address provided
by your ISP and HTTP Port as shown below.
Summary of Contents for RSCM-13601B
Page 1: ......
