Chapter III Simple Setting and Operation
This chapter gives an example to show the simple operation. User can
follow it and to simple test.
3.1Operation Preparation
3.1.1 Connect the telephone line and power correctly.
3.1.2 Wireless Siren Register: When the power is on, input 1111 to
disarm the control panel. If the red light on the control panel is still
on, input 1111 again. Then press the "save" key on the siren, hold on
and press the “alarm”. If the siren starts to whistling, the register is
successful. And lose the "save" key. The distance of the siren and the
control panel can be about 50m.
3.1.3 Alarm Telephone Number Setting: press * for 3 seconds,
9999
2
1
alarm telephone number
#
3.1.4 Record Alarm Location: press * for 3 seconds,
9999
2
7
face the speaker and speak the location
press #.10 seconds later, the
panel will replay the recorded voice. If user does not satisfy it, user
can record again.
3.1.5 Register Remote Controller: press * for 3 seconds,
9999
6
1
1, and then press any key on the remote controller, if 2 beeps
comes out from the panel, the register is successful.
3.1.6 Register Wireless Detector: press * for 3 seconds,
9999
6
3
1
then let the detector emit signal, if 2 beeps comes from the
panel, the register is successful.
Above are the simple operation processes. Chapter IV gives shows
more detailed operation processes.
Note: the user password we mention is the defaults 1111, if user
changes the password, please use the new password.
User Manual
Summary of Contents for STS-408
Page 1: ......
