3
13.0 SCHEMATIC DRAWINGS WITH SPARE PARTS LISTS
14-16
14.0 Annex DIMENSIONS WITH OPTIONAL DRILL STAND
17-18
SAFETY
1.0 SAFETY
The safety precautions that must be obeyed are explained in this chapter.
WARNING!!
Be sure to obey the instructions written in this manual, when you operate the machine. If you have any
questions, please feel free to contact Shibuya’s authorized dealers.
1.1 THE MEANING OF THE SYMBOL MARKS
In this manual, warning signs are classified into four levels based on the level of potential risks.
DANGER!!! :
This mark indicates the imminent risks that lead to death or serious injury for the
operators and others, unless the safety instruction is observed.
WARNING!! :
This mark indicates the potential risks that may lead to death or serious injury for the
operators and others, unless the safety instruction is observed.
CAUTION! :
This mark indicates the potential risks that lead to injury for the operators and others,
unless the safety instruction is observed.
NOTE:
This mark is used for the information that is necessary for you to know.
1.2 SAFETY PRECAUTIONS
DANGER!!!
The following instructions are essential safety measures that you must take.
Unless observed, improper way of use leads to death or serious injury of yourselves or others.
[1]
Know your machine. Read carefully this manual and also a manual of the Drill Stand to be used with this Drill Motor in
order to learn the application of the machine and the limitations as well as potential hazards associated with the machine.
[2]
During the operation, the Core-Bit rotates with very high speed. Do not wear loose clothing, dangling objects, rings, and
jewelry to eliminate the risk in which the operator gets caught in the moving parts such as the Core-Bit. Keep your face
away from the air inlet, outlet of the motor. Long hair must be tied up.
[3]
Always wear protective clothing such as helmets, safety goggles, earplugs, heavy-duty gloves, and special work boots
with reinforced toe. (During the operation, do not wear gloves to reduce the risk in which the operator gets caught with the
Core-Bit.)
CAUTION!
This machine generates sound pressure level of 84 dB(A). Always wear ear protection when working with this
machine.
[4]
Do not operate when you are tired or under the influence of any medicine, drugs, and alcoholic beverages.
[5]
Consider the work area environment. Do not expose the drill motor to water. Water in the drill motor increases the risk of
electric shock.
[6]
Do not operate the machine in the presence of flammable liquids or explosive or combustible gas. Sparks generated by
Armature and Carbon Brushes in the Drill Motor could cause an explosion of fire.
[7]
In case of operation in a closed room or basement, make sure that the air is in good condition (plenty of oxygen, no toxic
gas), before operation.
[8]
Before operation, do ensure that the Core-Bit is connected with the Spindle of the Drill Motor tightly and securely, so that
the Core-Bit will not come off and not cause damage to persons and property around.
[9]
Before operation, do ensure that the Drill Stand is fixed firmly to the surface of drilling object, when using drill stand.
[10]
Never use this machine without the Portable Residual Current Device (PRCD), which is equipped in the electric cable.
And inspect it periodically to confirm that it works properly.
[11]
Before starting drilling, make sure that there is no live electric cable in the drilling object that the Core-Bit will cut through.
[12]
Do not allow other persons to use this machine, unless they have read and understand this manual.
[13]
Unintentional start of the Drill Motor is quite dangerous. When the Drill Motor is not in use with the drilling operation, do
ensure that the plug is disconnected from the power source outlet.
[14]
If the main power supply gets power failure during operation, turn off the switch immediately in order to avoid the
unintentional start of the Drill Motor.
