Shibaura ST329, Operator'S Manual

Page: 31 / 72

CONTROLS, INSTRUMENTS AND OPERATIONS
29
REAR REMOTE CONTROL VALVES
(Optional)
HST - REAR remote control valve
Your tractor can be equipped with one remote con-
trol valve. The remote control lever is located on
the right-hand control quadrant, and inside, shown
in Figure
39 .
To operate the remote valve, pull the inside remote
control lever rearward to extend the cylinder. Push
the remote control lever forward to retract the cyl-
inder. Release the control lever to stop the cylinder
in any position.
The rear remote are standard with 3/8” quick cou-
plers, in Figure
40 .
HST - Single acting remote control valve
To operate the remote control valve (with detent),
pull the outside remote control lever rearward to
extend the cylinder.
Push the outer remote control lever forward to re-
tract the cylinder. The Release the control lever to
stop the cylinder in any position before it is fully
extended, the lever automatically returns to the
Neutral and the position of cylinder is held (detent).
9
×
× ×
×
3 - Rear remote control valve
Your tractor can be equipped with single/
double acting remote control valve.
The remote valve may be changed with control
screw turning on the valve.
The remote control lever is located on the
right-hand quadrant,shown in Figure
39 .
To operate the remote valve, pull the remote con-
trol lever rearward to extend the cylinder.
Push the remote control lever forward to retract the
cylinder. Release the control lever to stop the cyl-
inder in any position.
In the case of single acting remote valve, release
the control lever to stop the cylinder in any position,
before it is fully extended, the lever automatically
returns to the Neutral.
The rear remote are standard with 3/8” quick cou-
plers, in Figure
40 .
Figure 39 - Rear remote Control Valve (Optional)
Figure 40 - Hydraulic Couplings