background image

E

N

G

L

IS

H

2

Introduction

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

: TO REDUCE THE RISK OF  ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

CAUTION

WARNING

Units shipped to Australia are designed for operation on 230 V AC only.
To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-
pin power point which is effectively earthed through the normal household wiring. Extension cords
used with the equipment must be three-core and be correctly wired to provide connection to earth.
Improper  extension  cords  are  a  major  cause  of  fatalities.  The  fact  that  the  equipment
operates satisfactorily does not imply that the power point is earthed and that the installation
is completely safe. For your safety, if in any doubt about the effective earthing of the power
point, consult a qualified electrician.
PAN-EUROPEAN UNIFIED VOLTAGE
All units are suitable for use on supplies 220-240 V AC.

FOR YOUR SAFETY

EUROPE

AUSTRALIA

220 V

-

240 V

READ THIS BEFORE OPERATING YOUR UNIT

CAUTION

• Leave a space around the unit for sufficient ventilation.
• Avoid installation in extremely hot or cold locations, or in an area

that is exposed to direct sunlight or  heating equipment. 

• Keep the unit free from moisture, water, and dust.
• Do not let foreign objects in the unit.
• The ventilation should not be impeded by covering the ventilation

openings with items, such as newspapers, table-cloths, curtains,
etc.

• No naked flame sources, such as lighted candles, should be

placed on the unit.

• Please be care the environmental aspects of battery disposal.
• The unit shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on

the unit.

• Do not let insecticides, benzene, and thinner come in contact  

with the set.

• Never disassemble or modify the unit in any way.

Notes on the AC power cord and the wall outlet.

• The unit is not disconnected from the AC power source(mains)

as long as it is connected to the wall outlet, even if the unit has
been turned off. 

• To completely disconnect this product from the mains,

disconnect the plug from the wall socket outlet.

• When setting up this product, make sure that the AC outlet you

are using is easily accessible.

• Disconnect the plug from the wall outlet when not using the unit

for long periods of time.

Information for Users on Collection and Disposal of
Old Equipment and used Batteries

These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries should not be mixed
with general household waste. For proper treatment,
recovery and recycling of old products and used
batteries, please take them to applicable collection
points, in accordance with your national legislation.

By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.

For more information about collection and recycling of
old products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.

[Information on Disposal in other Countries outside the
European Union]

These symbols are only valid in the European Union. If
you wish to discard these items, please contact  your
local authorities or dealer and ask for the correct method
of disposal.

Note for the battery symbol (bottom two symbol
examples):

The sign Pb below the symbol for batteries indicates that
this batteries contains lead.

TX-5505(G)_ENG_100819_TX-5505(G)_ENG  2010-08-19  오후 5:31  페이지 2

Summary of Contents for TX-5505


















Reviews: