TUNING / PRESET
E
N
G
L
IS
H
10
Manual tuning
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band (and the tuning mode in
case of using the TUNING/PRESET knob), rotate this
knob one by one slowly or press the TUNING UP(+)/
DOWN(-) buttons repeatedly until the right frequency has
been reached.
Auto presetting
• Auto presetting function automatically searches for FM
stations only and stores them in the memory.
• Press and hold down the TUNING UP(+)/DOWN(-)
buttons to reach quickly the right frequency.
• Then “FM AUTO PRESET” flickers for several seconds.
• If “FM AUTO PRESET”goes off, press the AUTO
PRESET button again.
• Then “SEARCH” flickers and the tuner starts auto
presetting.
• To stop auto presetting, press this button again.
• Up to 40 FM stations can be stored.
■
Notes :
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, perform
“Manual presetting” procedure with using “Manual tuning”
operation.
• The preset number flickers for several seconds.
■
On the front panel
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by storing
another frequency in its place.
• If the preset number does not flicker or disappears, start
again from the above step 2.
1.
While listening to FM broadcasts, press the
AUTO PRESET button.
2.
When “FM AUTO PRESET” flickers, press the
AUTO PRESET button again.
3.
Rotate the TUNING/PRESET knob to select the
desired preset number(1~40) and press this
knob.
4.
Repeat the above steps 1 to 3 to memorize
other stations.
Manual presetting
• You can store up to 40 preferred stations in the memory.
1.
Tune in the desired station with auto or manual
tuning.
2.
Press the TUNING/PRESET knob or the
MEMORY button.
TUNING / PRESET
or
or
or
AUTO PRESET
TUNING / PRESET
TUNING / PRESET
F
S T
M
M
8 9 . 1 0
0 2
Hz
P
TX-5505(G)_ENG_100819_TX-5505(G)_ENG 2010-08-19 오후 5:31 페이지 10