01. Place the magnetic whisk into the whisk attachment.
It should snap into place.
• If the magnetic whisk is not inserted correctly,
it may dislodge during operation. Ensure the
whisk is in the center of the whisk attachment,
where it should magnetically snap in place.
• Do not operate the milk frother without the
magnetic whisk in place, as it may cause
uneven heating and scalding.
02. Drop the whisk attachment with whisk in place into
the inner canister.
03. Fill the inner canister with milk to the desired level.
If using “Hot Froth” or “Cold Froth”, do not fill past the
MAX FROTH line. If using “Hot Milk” do not fill past
the MAX MILK line.
• Never operate with milk below the MIN marking.
The milk frother will automatically turn off if the
inner canister is empty. If this occurs, the
appliance will require a cool down period before
re-use.
04. Place the lid onto the frother and push it down securely
in place.
05. Place the frother onto the power base.
06. Plug the power cord into an available power outlet.
07. Press the POWER button for the desired result. Press
once for “Hot Froth.” Press twice for “Hot Milk.”
Hold down for “Cold Froth.”
08. The frother will begin. It will should take between
two-and-a-half and 3 minutes to complete its cycle.
If using one of the heated options, it will reach
approximately 150F.
09. Once the selected cycle has completed, the frother
will automatically shut off and the indicator light
will deactivate.
10. Remove the lid and lift frother off power base to serve.
• Always pour froth and milk out of the appliance.
Using metal objects may scratch the nonstick
surface. If needed, use a wooden spoon.
11. When finished serving, remove power cord from the
electrical outlet.
TO USE
TO CLEAN
The milk frother should be cleaned after each use.
01. Remove lid, whisk attachment and magnetic whisk. Wash with warm, soapy water.
02. Rinse nonstick inner canister with warm, soapy water. Use a soft sponge or cloth to wipe off any remaining
milk residue.
03. Taking care not to get any of the electrical components wet, wipe the frother body gently with a soft wet cloth.
04. Dry all parts thoroughly and reassemble for next use.
• Do not use harsh abrasive cleaners, scouring pads or products that are not considered safe
for nonstick coatings to clean.
• Any other servicing should be performed by Sherwood Housewares.
• For replacement parts and service questions, contact Sherwood customer
service at [email protected] or 1-877-393-8936.
8
9
