manualshive.com logo in svg

Sherwood RD-6503, Operating Instructions Manual

Share
Download
Sherwood RD-6503 Operating Instructions Manual Download Page 7

ENGLISH

8

6. 

CONNECTING SUBWOOFER PRE OUT

• To emphasize the deep bass sounds, connect a powered

subwoofer.

7. 

CONNECTING SPEAKERS

• Be sure to connect speakers firmly and correctly according to

the channel(left and right) and the po and -). If the
connections are faulty, no sound will be heard from the
speakers, and if the polarity of the speaker connection is
incorrect, the sound will be unnatural and lack bass.

• For installing the speakers, refer to "Speaker placement" on

page 9.

• After installing the speakers, first adjust the speaker settings

according to your environment and speaker layout.

(For details, refer to "SETTING THE SPEAKER SETUP" on
page 38.)

Caution :

• Be sure to use the speakers with the impedance of 6 ohms or

above.

• Do not let the bare speaker wires touch each other or any

metal part of this unit. This could damage this unit and/or the
speakers.

8. 

AC INPUT CORD

• Plug the cord into a wall AC outlet.

Summary of Contents for RD-6503
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands