manualshive.com logo in svg

Sherwood RD-6503, Operating Instructions Manual

Share
Download
Sherwood RD-6503 Operating Instructions Manual Download Page 4

ENGLISH

5

System Connections

• Please be certain that this unit is unplugged from the AC outlet before making any connections.
• Be sure to observe the color coding when connecting audio, video and speaker cords.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.

1. 

CONNECTING ANTENNAS

• Change the position of the FM indoor antenna until you

get the best reception of your favorite FM stations.

• Place the AM loop antenna as far as possible from the receiver, TV set, speaker cords and the AC

input cord and set it to a direction for the best reception.

• If the reception is poor with the AM loop antenna, an AM outdoor antenna can be used in place of

the AM loop antenna.

• A 75

Ω

outdoor FM antenna may be used to further

improve the reception. Disconnect the indoor
antenna before replacing it with the outdoor one.

Summary of Contents for RD-6503
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands