22
Connection Diagram 4
Connecting to the Cable or Satellite Box and TV
(Using Digital Audio + Component Video)
This configuration shows the PT-7020A connections to the “main” video display where video
output is taken from the Component Video outputs (the Red/Blue/Green trio) labeled
“Component” on the back panel of the PT-7020A. Audio in this case is connected between the
set top box and the PT-7020A using a Digital Audio (Coaxial or Optical) connection.
Note: Digital Audio connections from the
Cable/Satellite Box to the PT-7020A are shown,
but if your Cable/Satellite Box is not equipped
with Digital Audio, analog RCA audio
connections would be the second choice.
Note: Component Video Input on the TV or
Projector. There may be more than one input
on high end video screens.
This will give the best analog picture quality, especially if the video source component
(such as the Cable or Satellite Box) output begins as a native Component Video output.
Remember that with the video trans-coding feature, the PT-7020A will still allow our
Composite, Component and S-Video source inputs to up convert to the HDMI outputs,
but you should always connect the highest quality video signal available.
Summary of Contents for PT-7020A
Page 39: ......
