Shenzhen BACKUP BELT 002, User Manual

Page: 8 / 136

8
HEAT functionality
CONDUCTING A HEAT TREATMENT
1. Make sure the main unit & remote
is on.
2. Press the HEAT button on the
remote. The heat signal light on
the remote will blink once to show
that a signal is sent to the main
unit.
3. The belt will start the heating and last
for 20 minutes before automatically
turning off. The main unit indicator
light will blink yellow for 10 seconds to
indicate a heat treatment has started.
The heating temperature is 42°C. It
will take a bit of time before you can
feel the heat after activation. The unit
will have enough battery for 8 full
HEAT treatments per full charge.
4. To stop the HEAT treatment before
the 20 minutes have passed simply
press the HEAT button on the
remote one more time. Alternatively
press and hold the remote ON/OFF
button to turn off both remote and
main unit instantly.
Removing the Backup Belt
1. After treatment, or when you want
to remove the device, loosen the
support belt, grasp the edge of the
device and gel pad to ensure the
gel pad does not stay on the skin (if
you are using the optional gel pad).
Slowly peel the device away from
the skin.
2. If you use the gel pads, align and
place the protective liners back on
the gel pads to prolong their useful
life. Ensure the pads are completely
covered.
Important! Do not remove
the device until tens treatment has
stopped.
English