User Manual
ATC-3001 1-port Modbus Gateway
Copyright
©
2011
SHENZHEN ATC TECHNOLOGY CO., LTD.
25
Network
The user can modify the IP address of any selected device, shown as the figure below. You can statically
assign IP address, Subnet mask, and Gateway. Optionally, you can set up the device with a host name.
You can select DHCP option to obtain an IP address automatically.
Locate
The user can apply this function to locate a device when its IP address is known, but its position is unknown.
If a device is selected, the device will appear to sing. Users can locate the device by selecting the
Configuration submenu
Locate
or clicking the
Locate
button on the toolbar.
Reboot
The device should be restarted after a successful modification of parameter configuration. Users can also
carry out a restart through the submenu option
Reset
.
The user can also select several devices at one time, and save the parameter information of these selected
devices into a designated parameter file by selecting "Save all the selected devices".
