User Manual
ATC-3001 1-port Modbus Gateway
Copyright
©
2011
SHENZHEN ATC TECHNOLOGY CO., LTD.
6
3.2 Configuration by Telnet Utility
One can use Telnet utility to change configuration settings of ATC-3001 by following steps
：
3.2.1 Login to the System
Open Ms-DOS command prompt window
Telnet to ATC-3001 using command
“
Telnet IP_address
”
.( For example
：
Input
Telnet 10.0.50.100
in
Ms-DOS command prompt window).After telnet to ATC-3001, system prompts for a password, the default
password is left it blank. (Figure 3.4)
Figure 3.4 Login to the system
Note:
One can press the default button of ATC-3001 to reset the password to the default value.
1. After verifying the password, the following terminal screen appears.( Figure 3.5)
Figure 3.5 Main menu
Note:
Changes to networking parameters will take effect only when one exit and restart ATC-3001.
->
Select
“
1
”
from
“
Input choice and enter (1~8,a~f):
”
to enter show configuration page as
following:( Figure 3.6)
