ShenZhen Yuejiang Technology Dobot Vision Kit Installation Manual Download

Page: 17 / 19

Dobot Vision Kit Installation Guide

Installation Guide

Issue V1.0

（

2018-09-12

）

User Guide

Figure 2.18 Connect light source switch



Connect light source switch to M1

Connect adapter cable to M1 light source switch, the red interfaces are 24V

power interfaces, the black interfaces are GND interfaces.

Connect M1 light source switch to light source.

Connect adapter cable to I/O interface on the base of Dobot M1.

Figure 2.19 Connect light source switch

NOTICE

If you need to use light source switch and air pump box at the same time. Please connect

the power cable of air pump box to

adapter

cable. As shown below, the red interfaces are

24V power interface, the black interfaces are GND interface.

Summary of Contents for Dobot Vision Kit




















Search results

Summary of Contents for Dobot Vision Kit

Reviews:

Related manuals for Dobot Vision Kit

Brands by name

Popular brands

ShenZhen Yuejiang Technology Dobot Vision Kit, Installation Manual

Search results

Summary of Contents for Dobot Vision Kit

Reviews:

Related manuals for Dobot Vision Kit

Brands by name

Popular brands