Shenzhen Sinjoe AWC-608, Manual, Page: 30 / 38

Shenzhen Sinjoe Laser Technology Co.,Ltd
30
4.4.4 Origin Mode ( Refer to view 4-4 )
Under the main menu interface, press or or or to move cursor
onto item 【 Origin mode 】 , then press to enter into 【 Origin mode 】 interface:
【
Key origin
】：
Take the original point selected by of LCD panel as beginning.
【
Soft origin
】：
System will work according to the position of data on coordinate of
software.
【
Machine zero
】：
Take zero point of machine (limit point) as beginning.
Press or to move cursor onto one item, then press to set specific
orientation mode
4.4.5 Control Mode (refer to view 4-4)
Under the main menu interface, press or or or to move cursor
onto item
【
control mode
】
, press to enter into
【
control mode
】
interface:
【 Soft layer params 】： Using the layer parameter set in software ( LaserCAD) to
deal with graphic and data. (Including: speed, maximum power and minimum
power of laser 1, maximum power and minimum power of laser 2)(Regarding the
instruction of layer parameter, please refer to 4.3layer parameter)