Shenzhen Sinjoe AWC-608, Manual, Page: 29 / 38

Shenzhen Sinjoe Laser Technology Co.,Ltd
29
interface, and then press or or or to modify the value. Then
press to finish the modification of this parameter.
4.4.3 Origin manage (Refer to view 4-4)
Under the main menu interface, press or or or to move cursor
onto item 【 Origin manage 】 , then press to enter into 【 Origin manage 】 interface:
Press or to move cursor onto one item, and then press :
Move cursor onto item
【
move to origin1
】
, and then press , system will move
laser head to the original position 1 (X=20.0mm ， Y=30.0mm).
Move cursor onto item [Current as Origin1], and then press , system will set
the position of current laser head as original position 1.
Move cursor onto item
【
origin 1(X)
】
or item
【
origin 1(Y)
】
, then press , it will
enter into sub interface to do modification manually on coordinate of original position.