address is overlap, etc.
c. got image from analog output but can not search IP address, then to check web
connection interface can not search IP, also analog output do not check power, can
investigate via network indicator.
6.
7.
Q
：
IPC reboot after power off, using CMS to access, but failed, can not find device.
A
：
when the device is under rebooting, need use CMS to connect it after a while when
it is finish rebooting.
Q
：
SD can do partition, after reboot, there is only one partition
A
：
a. make sure the total capacity of SD card is over 2G, and the space for recording is
over 2G.
b. choose ”always recording” to record a file in SD card, then play it to see if it is
normal.
c. pull out SD c a r d a n d i n s e r t i t i n t o P C , c o p y a c o m p r e s s f i l e t h a t
w ith s am e cap aci ty of your SD car d, if u c an p ut i t i n, if yes, then
cop y it out to see if c an norm al dec om press
8. Q
：
30W D1 960H 130W 200W how much space will be in each hour.
A
：
it is related to image quality, different image quality with different bit rate that is showed
out, such as D1, default is 1Mbps 1M(1 second) *60*60/8=450M /hour, regularly, SD card
for recording, suggest to set motion detect and alarm record and front side, other recording
to be save at back side.
9. Q
：
Monitor image abnormal, such as too bright, image flicker, poor backlight
compensation
A
：
a. base on the image color from client side and integrate with
local environment to adjust it to be the best
b. adjust camera parameter on client side and integrate with local environment to
adjust it to be the best
10. Q
：
UPNP function is not working
A
：
a. target router function is stable, suggest to use TP-LINK router
b. target router have UPNP function and it is enable
c. IP address of camera and router is not in the same network segment.
d. after enable UPNP function of camera and reboot device.
e. reboot target router
11. Q: NTP function in net service is not working
A
：
enable related function of NTP server.
12. Q
：
can not search out recent video file, if we set client side recording via CMS
A
：
If the client side is under recording, you can not search out file, you nee to stop
recording firstly, then you will search out.
13. Q
：
Client side can not log-in when the IP address was revised, tips with: log-in over
time and can not find device.
A
：
a. no IP conflict or MAC conflict
b. close client side, log-in again after 10s.
14. Q
：
WIFI function of IP camera is not working
A
：
a. WiFi module and device correctly connected.
b. target router support WIFI and it is enable
c. the password of router that device input is correct.
d. the WIFI module is used is 3070 series
e. IP address of device is in the same network segment.
15. Q
：
Set language in regular via CMS, language of CMS is without change
Summary of Contents for SEWIFIIPCVW
